eHouse Ethernet (LAN) | eHouse 1 (RS-485/422 - Full Duplex) | eHouse CAN + RF | eHouse WiFi b/g/n | eHouse PRO, Hybrid, BMS | Software |
eHouse RF (862/902/915MHz) - Wireless Smart Home & IoT system
eHouse RF controllers contains eHouse4CAN controllers (eHouse for CAN - Controller Area Network) with plugable RF module (862,902, 915MHz) for wireless operation
They can be used in installations
- Wireless Smart flat
- Wireless Smart home
- Hybrid automation systems
- Wireless Greenhouse automation, winter gardens, etc.
- Wireless Home automation, building, flats, etc.
- Wireless Electronic home
- Wireless Apartment control
Controllers may be present in various equipment variants (due to external accessories used) and module type (Inputs only or Input/Output).
Controllers can be mounted directly in electrical cans
eHouse RF controllers connect to a network of maximum 100 devices and connect to a Linux computer via a USB or RS-232 adapter & RF gateway
Controllers manage the software entirely eHouse Smart House Server working on linux :( x64, x86, Raspberry Pi).
EHouse RF controllers have system events compatible with "eHouse 1" and "eHouse Ethernet" and they can be integrated with them through the eHouse Server software.
Events related to outputs, the inputs are much more functional than in the eHouse 1, Ethernet eHouse controllers, and there is no division of controller types.
Hardware resources of the smart home eHouse4CAN controllers
- infrared IR transmitter for controlling external HiFi equipment in the range of visibility (*)
- RS-232/TTL port for the installation of driver extensions and dedicated solutions
- 4 programmable digital outputs with a built-in 230V/5A relay (for switching on/off external electrical equipment) (**)
- 4 programmable digital inputs (on/off) (for connecting the switches, sensors, e.t.c)
- 4 PWM/DC dimmers outputs (Dimmable LED lighting - requires the connection of external drivers) that can be operated individually or as RGBW
- infrared IR receiver for controlling the eHouse system with an infrared remote control in the SONY standard (*)
- 2 analog inputs - Measuring (for connecting external sensors, eg: temperature, lighting, humidity, wind strength etc.)
(**) applies to the output modules and "All in One"
Functionality of the output of the Smart eHouse RF controllers
- outputs can work as double for controlling blind, gates, marquess, window, actuators, three-way solenoid valves or with regulation (+/- )
- outputs can work as triple or quadruple with sequential switching on of the next input (for controlling the power of recuperators, fans)
- outputs can work as a single one for switching on/off, toggle, turn on for a limited time, cyclic switching on and off for a given time
Functionality of the eHouse RF Smart Home controller inputs
- programmable time of switching on from (2s, 100h)
- alarm option - signaling the activation of a given input immediately or with a programmed delay
- possibility to define a system event eHouse related to the inclusion of a given input
- sw/hw filter to prevent interference by accidental activation
- inversion mode - reverse work (off = 1)
